10 Best Iottie Car Mount Replacement Suction Cup of 2025

Tested and Reviewed: Top 10 Iottie Car Mount Replacement Suction Cup deals with expert ratings from 8.1 to a perfect 10

March 2026 Edition

Editor's Choice

9.7

AZXYI

AZXYI Very High Bond Sticky Adhesive, 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount

Free Shipping

Editor's bottom line:

“This iottie car mount replacement suction cup is the best one we tested. In terms of quality, brand and price, we couldn't ask for more.”

Main Highlights

6Pcs Clear Adhesives ReplacementAZXYI offers 6 Pcs round clear sticky adhesive pads(Diameter: 80mm,3.15") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Easy to UseTo maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
Cut into any size you need & Compatible With Suction BaseYou can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
Easy to Install - Step 1Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly.
Easy to Install - Step 2After sticking the adhesive to the base, peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
Very High Bond & Easy to RemoveThese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Show Price

Picked by 397 people today

9.5

OQTIQ

OQTIQ Replacement Suction Cup Mount Part, with Replacement Dashboard Pad Disc, 17.2mm Ball Joint Suction Cup with Adhesive Mounting Disk for Phone Mount Holder, Magnetic Mount, Windshield/GPS

Free Shipping

Main Highlights

UNIVERSAL COMPATIBILITY - The Car Phone Mount replacement is fully adjustable with all 17.2mm swivel ball mounting bracket. Perfect replacement for broken parts and save your cost. NOTE: Mounting bracket not included.
EXTENDABLE ARM - Just pull and push to adjust arm length that ranges from 4.2in to 5.8in and pivot up or down(240 degrees adjustable)for optimal viewing height. Prevent blocking your view while driving.
EASY SETUP - Attach your OQTIQ car phone mount to your dashboard or windshield in lighting speed using the strong suction cup. NOTE: Please avoid exposing it to the sun at high temperature for a long time.
BUILD TO ENDURE: The compact, sleek engineered frame provides a tough, ultra-durable, clamping grip on your phone. This replacement suction cup part can apply to the windshield, dashboard, and desk.
TIPS - Please use the 3M VHB sticky gel pad if the surface you want to mount is not smooth but textured. 3M VHB sticky gel pad included.

Show Price

9.5

Zeust

Dashboard Pad Mounting Disk for Suction Cup Mount - 3M Dashboard Sticky Pad for Car Phone Holder - Ultra Sticky Adhesive Replacement Disc for Garmin Dash Cam, GPS, iOttie Car Mount - 75mm 2-Pack

Free Shipping

Main Highlights

Ultra Sticky Pads for Car Dashboard - Easy to install, this dashboard sticky pad is very secure on your car's dash and window thanks to the UltraClasp Grip(TM) system. Works with any 80mm suction cup mount for smartphones, Garmin and TomTom GPS, as well as iOttie car mount
Easy 3-step Installation To install this dashboard mounting pad simply clean the part of your dashboard where you want to install your suction cup phone mount. Then, peel off the 3M paper backing, place the sticky pad on the clean surface, and press down firmly for 60s
Residue-Free Dash Mount Pad Our car mount adhesive replacement pad keeps your dashboard clean and residue-free. You can easily upgrade to a bigger GPS dash mount of phone holder
Perfect For All Types of Vehicles - This 3M dashboard adhesive disc provides amazing adhesion and a smooth suction surface. This means you can use it for any car phone holder, iottie car mount or Garmin GPS mount, no matter what car you're driving
Strong Adhesive Pad that Sticks Anywhere You can put this sticky dash mount anywhere, knowing that your suction phone mount will stay put. The adhesive for car mount is heat resistant and adheres to vertical surfaces, uneven dashboards & windshields

Show Price

9.2

iOttie

iOttie Adhesive Dashboard Pad for Car Mounts Dashboard Pad, Black , 3.1"L

Free Shipping

Main Highlights

Sticks to Dashboard with high quality semi permanent acrylic tape
Acrylic Tape sticks to almost all textured and curved surfaces
Compatible with all iOttie Dashboard Mounts for smartphones
We strongly recommend using a Dashboard Pad to prevent possible damage that may occur if you apply suction cup directly to your dash
This is a semi permanent solution; each pad is one time use only. Once removed, it may not be reusable
PLEASE NOTE: Consumers may receive SKU ACDPIO301 or ACDPIO201_01, please note they are the same product!

Show Price

9.0

PKYAA

Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, PKYAA 3pcs 2.76"(70mm) Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam

Free Shipping

Main Highlights

3Pcs Clear Adhesives ReplacementPKYAA offers 3Pcs round clear sticky adhesive pads(Diameter: 2.76"/70mm,) for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
High Temperature Resistance Sticky AdhesiveThese stickers have high temperature(120+) resistance performance. You can use it without worry in hot Summer. Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Easy to fix your car phone socket base, heavy duty dashboard mount base, you can stable and secure driving uber, truck, vehicle in bumpy roads.
Easy to InstallProvided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
Easy to RemoveThese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
Package includes3 x 2.76"(70mm) round sticky adhesive. Please do not hesitate to contact us and we will provide you our best after-sale service.

Show Price

8.8

MGQFY

MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard/Windshield Pad Mounting Disk for Suction Cup Car Phone Mount Holder Bracket GPS Camera and Other Suction Cup Items. (Clear)

Free Shipping

Main Highlights

What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Mounting Discs,Metal Plate Mount,Windshield,Tiles, Wall Pictures and more.
Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Perfect for Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.
CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
Strong Adhesive and not leave a residueStrong adhesive is strong yet leaves no residue when removal is required.
These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.

Show Price

8.6

SkyTitan

SkyTitan 3 Pack Sticky 17mm Ball Mount for Car Mount Adhesive Replacement Magnetic Phone Holder MagSafe Mounting Base Dashboard Sticker 3M VHB Tape

Free Shipping

Main Highlights

Upgraded Car Mount Sticker: SkyTitan adhesive car mount has a strong and residue-free sticky base, that will hold your phone steadily onto the dashboard. Optimal replacement mounting base for magnetic car phone mount, MagSafe car mount, car phone holder
Standard 17 mm Ball Mount: SkyTitan stick-on car mount features a standard 17 mm ball joint that is compatible with a wide range of cell phone car mount. It is also an alternative to a cup holder mount, vent phone mount, suction cup holder, CD slot mount
Various Viewing Angles: This mini car mount's incredibly flexible ball joint offers an endless range of viewing angles and quick transitions between landscape and vertical views
Very Simple to Install: Select a sturdy and flat surface, thoroughly clean it, then allow it to dry. Place the car mount on the surface, apply pressure for more than 20 seconds, and wait 24 hours for it to solidify before holding the phone
Note: Fixed nuts, phone holders, clamps, MagSafe mount, and magnets are not included. Included 3 pcs adhesive ball mount base, user manual. Not suitable for vinyl, cloth, leather, or wax-treated surfaces. Avoid putting your fingers on the adhesive pad

Show Price

8.3

iOttie

iOttie Easy One Touch Mini Dash & Windshield Car Mount Phone Holder || iPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge, Note 9 & Other Smartphones

Free Shipping

Main Highlights

EASY ONE TOUCH LOCK RELEASE: Patented Easy One Touch mechanism allows quick one-hand open and close operation
UNIVERSAL MOUNTING: Holds all phone and case combinations from 2. 3" - 3. 5"
STRONG SUCTION: Suction cup offers high stick strength, can be paired with separate dashboard pad for added strength
ADJUSTABLE VIEWING: Cradle rotates at the swivel Ball 360 degree for optimal viewing
COMPACT DESIGN: Small Compact design allows to take up minimal space on your desired mounting location

Show Price

8.1

iOttie

iOttie Easy One Touch Wireless Qi Fast Charge Car Mount Kit, Fast Charge: Samsung Galaxy S10 S9 Plus S8 S7 Edge Note 8 5, Standard Charge: IPhone X 8 Plus & Qi Enabled Devices, + Dual Car Charger

Free Shipping

Main Highlights

EASY ONE TOUCH LOCK/RELEASE: Patented Easy One Touch mechanism allows quick one hand open and close operation.
QI WIRELESS FAST & STANDARD CHARGING: Qi Wireless Fast Charge Enabled Devices will enjoy Qi fast charge speeds. Please note all other devices will charge at standard rates
UNIVERSAL MOUNTING: Holds all phone and case combinations from 2.3 inches - 3.5 inches. Mount rotates 360° for optimal viewing angles
DUAL USB CAR CHARGER: Built in micro USB cable for Easy One Touch Wireless and extra USB port providing the flexibility to charge a secondary device
MOUNTING OPTIONS: Suction cup installs on windshields or dashboards with a strong hold and can be removed and reused with a simple water rinse

Show Price

8.1

Ciencimy

Ciencimy Car Mount Base Designed for MagSafe iPhone 16 15 14 13 12 Series, Only for Diameter 17mm/0.67 inch Universal Joint Ball of Phone Holder, with 2pcs Metal Plate Fit for All Phones

Free Shipping

Main Highlights

Snap and Go! Designed for iPhone 16/15/14/13/12 Series- The Magnetic Car Mount is specially designed for iPhone 16/15/14/13/12/Pro Max Mini Plus, & Mag Safe case. The magnetic phone holder attaches automatically to your phone without additional metal plate. 0.1 second for precise attachment, providing you with a simple "Snap and Go" driving experience! (Note: For a regular Non-magnetic case, NEED stick the "O" metal ring to get stronger magnetic power)
Work for All Phones and Cases- This CIENCIMY Car Mount Base works for all phones. We provide 2 extra [ Hollowed-out Metal Ring] , simply stick one on your phone or case, and the magnetic car phone holder and the metal ring will be perfectly matched. One mount base, compatible with all phones, so easy!
Broad Compatibility - for Diameter 17mm/0.67inch Ball Joint- The Car Mount base replacement can be used for ALL 17mm swivel ball mounting brackets. No matter what type of car phone mount you currently have - air vent, dashboard, windshield, CD slot, or cup holder - this car mount base is a perfect replacement for broken parts and save your money. You can also use it for your phone stand mount at home or in the office. (Attention: You phone mount bracket MUST HAVE a 17mm Ball Joint)
Broad Compatibility - fit for Various Car Mount Brands- This Car Mount Base replacement is a perfect magnetic accessories for your existing car mount brand, fit for iOttie/LISEN/Qifutan/CINDRO/VANMASS/AINOPE/vanva/Miracase/APPS2Car/VICSEED/Lamicall/Humixx/OQTIQ/TORRAS/PROfezzion/andobil/ESR brand and so on.(NOTE: Before purchasing, please make sure your current car mount has a universal Diameter 17mm/0.67inch Ball Joint, ensuring that our Car Mount Base can be replaced in your car holder)
Strong Magnets Lock Your Phone Firmly- N52N50N48 Most high magnetic strength in industry, this Magnetic Car Mount uses the strongest N52 Neodymium Magnets, the powerful magnetic attraction is better than the official mag safe. Surprisingly, the magnetic phone mount built-in N52 magnet array forms a closed magnetic field, wont block the wireless charging function of your phone, and the navigation signal and call quality will not be disturbed.
One-Handed Operation Design- Using together with any 17mm swivel ball mounting bracket, this phone mount base allows one hand to rotate it from portrait to landscape view quickly, getting the best viewing angle. Different from traditional holders with side clamps, this car mount base also gives you no obstruction to slide a finger on the screen or press the side buttons. It is favorable for navigation and sending and receiving phone calls. You can enjoy a more convenient and secure drive.
36 Months Warranty - 36 Months Hassle Free Replace/Return. Just send us message freely if any issue during the use. Customer satisfaction is our biggest responsibility! Our professional after-sales team will provide the most efficient and satisfactory solution!

Show Price

Our Best Overall Choice

Best Choice

9.7

AZXYI

AZXYI Very High Bond Sticky Adhesive, 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount

Free Shipping

Editor's bottom line:

“This is the best one we tested. In terms of quality, brand and price, we couldn't ask for more.”

Main Highlights

6Pcs Clear Adhesives ReplacementAZXYI offers 6 Pcs round clear sticky adhesive pads(Diameter: 80mm,3.15") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Easy to UseTo maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
Cut into any size you need & Compatible With Suction BaseYou can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
Easy to Install - Step 1Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly.
Easy to Install - Step 2After sticking the adhesive to the base, peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
Very High Bond & Easy to RemoveThese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.

Show Price

Deals are Live

Special Amazon deal ends in: