10 Best Hidden Remote Control Extenders of 2025

Main Highlights

• 
  An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look
• 
  IR Repeater system allows you to Control home theater components located behind cabinet doors
• 
  Included with the system is - IR Receiver (2 inches by 1/2 Inch); Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches); 2 dual IR emitters blaster
• 
  Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB; Support up to six emitter output connections
• 
  Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW; If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end

Main Highlights

• 
  The IR Transmitter and Receiver Extends IR signal using a repeater also know as IR repeater kit. Upgraded- with a Dual Freq IR Receiver for the latest in technology in Audio and Video Controls
• 
  IR Extender Kit includes - IR Distribution Block - Mini IR Receiver - (2) Dual IR Emitters - AC/DC Adapter. Everything you need in an IR Kit from IR sensors and receivers for complete AV Control
• 
  Our Electronic Accessories are Simple to use - Basic Plug and Play - Controls 4 devices out of the box, (expandable to a maximum of 12 devices). Offers Full Infrared TV and cable box control
• 
  Easy to install for your Home Theater Control. IR Remote Extender sets up in just a few minutes. Commonly used for IR extender for cable box and other set top boxes to Home Theater Systems / Soundbars
• 
  Everything you need is in the box to get up and running fast. From the Infrared eye for a cable box or other set top box, to the Mini IR receiver. This Remote control repeater is a proven winner.

Main Highlights

• 
  Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices
• 
  IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc
• 
  IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet
• 
  High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
• 
  Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference

Main Highlights

• 
  Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 8 devices.It is equipped with two receiving points, receive infrared signals at two angle.
• 
  IR Repeater controls up to 8 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
• 
  The infrared repeater supports the remote control of 20K-60KHz., it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances.
• 
  High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver,while flashing LED indicates the signal is being sent.
• 
  Allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!

Main Highlights

• 
  {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmissionOperating range:20-60HZ
• 
  {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• 
  {SIMPLE INSTALLATION} of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• 
  {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF); 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay
• 
  {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them

Main Highlights

• 
  Spring Rope Structure for Anti-Loss DesignThe unique spring rope structure ensures that when the remote control or small items are placed back on the base, the spring automatically retracts, eliminating the worry of losing them.
• 
  Secure Adhesive BaseEquipped with a sturdy adhesive base, it securely attaches to both the wall and the remote control. The installation is stable and reliable, effectively preventing the base from falling off. Make sure the base is attached to the smooth back of the remote control.
• 
  Convenient Magnetic DesignThe distinctive magnetic design allows users to quickly retrieve and place the remote control. The high-intensity magnet ensures a firm hold, making it easier to manage the remote control.
• 
  Patented Multi-Purpose Storage SolutionThe patented design enables long-term storage of the remote control, and the special adhesive can be easily removed by pulling the tab, offering both durability and environmental friendliness. In addition to remote controls, it can also be used to secure and organise other small items such as tools and keys, improving overall storage efficiency.
• 
  Wide Compatibility and Easy InstallationSuitable for most remote controls or small items, ensuring the attachment surface is smooth and flat. The simple adhesive design allows for easy installation without the need for tools. Applicable to various surfaces such as walls, glass, tiles, device sides and wood.

Main Highlights

• 
  2Pack Magnetic Remote Control Holder with Security Cable, Retractable Remote Control Organizer Easy Installation Stable Suitable for Remote TV Fan and Air Conditioner Remotes Tidy Anti-lost

Main Highlights

• 
  This IR Repeater Kit Allows You to Control A/V component by the Existing IR Controller, Control the IR Devices Between Two Rooms Such as Adjusting the Volume or Changing TV Channel.
• 
  With 1 Receiver Picks up the Signal from the Remote Controller, the Receiver is with a Convenient IR Confirmation LED
• 
  With 4 emitters send the Signal to the A/V Components
• 
  34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control)
• 
  5V USB AC Power Supply

Main Highlights

• 
  IR REMOTE CONTROL - Simplify your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind cabinet doors and a wall. No more boxes placing on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control!This was a very economical and effective way to make it happen.
• 
  EASY TO USE - Plug the USB into your TV, set top box or a 5V wall adapter(adapter not included) for supply power, then paste the IR emitter(small end) using it's own adhesive over on the device with an IR sensor you wish to control(up to 10cm/3.9inch).Lastly, place the IR receiver(big end) end in the line of sight of your remote control (up to 10m/ 32ft).
• 
  WIDE BAND TECHNOLOGY - 20-60KHZ,works on most infrared control devices(not RF)! Suitable for infrared remote control, infrared extender, DVD player, STB box,Cisco,DirecTV,Roku, Sony, Yamaha,etc.
• 
  EXCELLENT SIGNAL RANGE - 180 degree IR receiving angle provides enough space for your remote control to get the right angle. The remote control signal receives a real-time response and moves forward quickly without delay.
• 
  HIDDEN DEVICES - Devices that require remote control must be placed where you cannot directly control your remote control. Otherwise, the signal from the remote control and the forwarded remote control signal will be sent to the set-top box at the same time. Signals out of sync can interfere with each other and cause them to stop working.

Main Highlights