10 Best E Paper Display I2c of 2025

Tested and Reviewed: Top 10 E Paper Display I2c deals with expert ratings from 8.1 to a perfect 10

March 2026 Edition

Editor's Choice

9.7

ELECROW

ELECROW ESP32 E-Ink Display 4.2 Inch, CrowPanel E-Paper HMI Display Compatible with Arduino IDE, E Ink Screen with 400x300 Resolution Black/White Color, Driven by SPI Interface

Free Shipping

Editor's bottom line:

“This e paper display i2c is the best one we tested. In terms of quality, brand and price, we couldn't ask for more.”

Main Highlights

Built-in ESP32-S3 Controller & SPI Interface - Comes with ESP32-S3-WROOM-1-N8R8 as the main MCU (up to 240 MHz) and standard 3-/4-wire SPI (default 4-wire) for easy integration. Supports the classic e-ink reader feel and responsive development flow
Ultra-Low Power & Power-Off Retention - This epaper display only consumes power during refresh. Static content stays visible without a continuous power supply ideal for battery-powered devices, smart labels and always-on displays
High-Resolution e-ink Display - This 4.2 e-paper display with 400x300 resolution delivers sharp black/white contrast and a wide viewing angle. Provides crisp clarity and a paper-like reading experience for smart tags and DIY devices
Reflective, Sunlight-Readable - The pure reflection mode means no backlight required; the content remains clearly readable even under strong sunlight. Hard-coated anti-glare surface ensures excellent visibility and durability
Rich Interfaces & Ready for Development - Includes BAT interface (2.2 V-3.7 V), UART0, 2x10 pin GPIO header, back/home/boot buttons, rotary switch, hard-coated anti-glare surface. Compatible with Arduino IDE, and suitable for DIY makers alike
Wide Application & Reliable Support - Whether youre building an e-paper reader/e-ink reader, smart home dashboard, electronic shelf tag or wearable display, this e-paper/eink display delivers. Any questions, get back to us

Show Price

Picked by 397 people today

9.5

ELECROW

ELECROW ESP32 E-Ink Display 5.79 Inch, CrowPanel E-Paper HMI Display Compatible with Arduino IDE, E Ink Screen with 272x792 Resolution Black/White Color, Driven by SPI Interface

Free Shipping

Main Highlights

Built-in ESP32-S3 Controller & SPI Interface - Comes with ESP32-S3-WROOM-1-N8R8 as the main MCU (up to 240 MHz) and standard 3-/4-wire SPI (default 4-wire) for easy integration. Supports the classic e-ink reader feel and responsive development flow
Ultra-Low Power & Power-Off Retention - This epaper display only consumes power during refresh. Static content stays visible without a continuous power supply ideal for battery-powered devices, smart labels and always-on displays
High-Resolution e-ink Display - This 5.79 e-paper display with 272 × 792 resolution delivers sharp black/white contrast and a wide viewing angle. Provides crisp clarity and a paper-like reading experience for smart tags and DIY devices
Reflective, Sunlight-Readable - The pure reflection mode means no backlight required; the content remains clearly readable even under strong sunlight. Hard-coated anti-glare surface ensures excellent visibility and durability
Rich Interfaces & Ready for Development - Includes BAT interface (2.2 V-3.7 V), UART0, 2×10 pin GPIO header, back/menu/reset/boot buttons, hard-coated anti-glare surface. Compatible with Arduino IDE, and suitable for DIY makers alike
Wide Application & Reliable Support - Whether youre building an e-paper reader/e-ink reader, smart home dashboard, electronic shelf tag or wearable display, this e-paper/eink display delivers. Any questions, get back to us

Show Price

9.5

waveshare

waveshare 7.5inch E-Ink Raw Display Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 800×480 Resolution with SPI Interface Without PCB

Free Shipping

Main Highlights

Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing

Show Price

9.2

LAFVIN

LAFVIN 2.13inch E-Ink Paper HAT Display Module Electronic Whiteboard NVMe M.2 SSD PCIe Compatible with Raspberry Pi 5/4B/3B+/3B/2B/A+/Zero W//Zero 2 W

Free Shipping

Main Highlights

Wide compatibilityIt features a standard Raspberry Pi 40-pin GPIO expansion header, enabling seamless connectivity and compatibility with a wide range of mainstream development boards.In addition to being compatible with the Raspberry Pi series, its SPI interface supports connection to various control boards such as Arduino and ESP32.
High resolutionThe screen has a resolution of 250x122, uses a black-and-white dual-color display, and features an embedded controller. It communicates with the control board via an efficient SPI interface and supports partial refresh functionality, enabling precise display of image content while significantly reducing refresh power consumption.
Persistent DisplayWith no backlight design, the screen can maintain the last displayed content for an extended period even when powered off, eliminating the need for additional power to sustain the display state and ensuring information remains readable for an extended period.
Ultra-low power consumptionDuring operation, it only consumes a small amount of power during content refreshes, remaining in low-power standby mode most of the time, significantly saving energy and making it suitable for long-running projects.
Free tutorialsComprehensive online documentation and code resources (driver board circuit diagram, Raspberry Pi/Arduino/ESP32 examples) are available for users to easily access via the online documentation website, facilitating quick development setup.

Show Price

9.0

waveshare

2.13inch Touch e-Paper Display with ABS Case for Raspberry Pi Zero 2 W/Raspberry Pi Zero/Pi Zero W/Pi Zero WH, 250x122 Pixels E-Ink, Paper-Like Effect Support Partial Refresh

Free Shipping

Main Highlights

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Display color: black, white. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W. Supports waken up by user-defined gesture.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Heat dissipation holes on the back,combined with thermal tape, effective heat dissipation.
Outline dimensions(Module): 69.15 × 38.90mm. Outline dimensions(Driver Board): 59.51mm × 34.00mm. Display area: 48.55mm × 23.71mm. Operating Voltage: 3.3V (V1.1 support 5V). Communication interface: SPI. Dot pitch: 0.194 × 0.194mm.
Greyscale: 2. Partial refresh time: 0.3s. Full refresh time: 2s. Refresh power: 26.4mW(typ.). Touchpoints: 5 (MAX). Touch type: Capacitive touch. Touch interfaced: I2C. Touch panel: Toughened Glass .
Comes with development resources and manual (examples for Raspberry Pi).

Show Price

8.8

waveshare

Waveshare 7.3inch 6-Color E-Paper Display Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, Support Jetson Nano/Jetson Orin Nano

Free Shipping

Main Highlights

This is a e-Paper display, with driver board. Compatible with Raspberry Pi and Jetson Nano
Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V / 5V MCUs
With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano.Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Rich WiKi Resources We provide official Wiki resources, please contact us for more information.

Show Price

8.6

Heltec Automation

Heltec Meshtastic LoRa ESP32 SX1262 E-Paper Monitor Development Kit 2.13 Inch E-Ink Display Screen WiFi Bluetooth Black White Price Tag IoT Compatible with Arduino (902-928MHz)

Free Shipping

Main Highlights

Lora Mesh Network | ESP32-S3R8 MCU & LoRa Module Support: Equipped with an ESP32-S3R8 MCU and LoRa module, this board offers versatile connectivity for IoT applications.
2.13-inch E-Ink Display & Long-Term Display: A 2.13-inch E-Ink display with 180-day continuous display after power outage for reliable e-paper applications.
Low Power Consumption & Long Range Transceiver: With 20uA deep sleep power consumption and LoRa support, the board ensures long-lasting battery life and extended range.
Highly extensible: Vision Master E213 has a rich set of pins and hardwareresources, which will allow you to expand widely. The SH2.0-4Pinterface can be directly connected to the QuickLink seriessensors.
Plastic support plate: A transparent plastic support platform is installed between thePCB and the display frequency, which can protect the electroniccomponents on the board and enhance the heat dissipationfunction of the board.

Show Price

8.3

waveshare

2.9inch e-Paper Display Module, 296x128 Resolution 3.3V/5V Two-Color epaper Display E-Ink Screen Module SPI Interface Compatible with Raspberry Pi/Arduino/Jetson Nano,Support Partial Refresh

Free Shipping

Main Highlights

SPI interface, Compatible with Raspberry Pi/Arduino/Nucleo, etc.
Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples Compatible with Raspberry Pi/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down

Show Price

8.1

waveshare

Waveshare 2.13inch Touch E-Paper E-Ink Display HAT Compatible with Raspberry Pi Zero/Zero W 250×122 Pixels with ABS Protection Case Supports Partial Refresh

Free Shipping

Main Highlights

Provide online user manual (examples for Raspberry Pi Raspberry Pi Zero /Zero W)
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W

Show Price

8.1

Coolwell

Coolwell 1.54inch e-Paper Display (G) - 200x200 Red/Yellow/Black/White e-Ink Screen with SPI Interface, Ultra-Low Power Consumption, Wide Viewing Angle for Raspberry Pi, Arduino, Jetson Nano

Free Shipping

Main Highlights

Crisp 200x200 e-Ink Display High-resolution 1.54" e-Paper (G) with Red/Yellow/Black/White colors, delivering paper-like visuals and wide 180° viewing angle, ideal for digital price tags, shelf labels, and industrial instruments.
Ultra-Low Power & No Backlight Maintains content without electricity for months, consuming power only during refresh cycles, perfect for battery-free asset tags and conference name badges.
SPI Interface & 3.3V/5V Compatibility Onboard voltage translator ensures seamless integration for Raspberry Pi, Arduino, Jetson Nano, and other 3.3V/5V MCUs via SPI control.
Optional Driver Board for Easy Setup Simplify prototyping with the SPI driver board (sold separately), featuring plug-and-play connectivity for rapid deployment in IoT projects and smart retail solutions.
Developer-Friendly Resources Includes online manuals, circuit diagrams, and code examples for Raspberry Pi/Arduino/Jetson Nano, accelerating development for industrial instruments and e-ink signage

Show Price

Our Best Overall Choice

Best Choice

9.7

ELECROW

ELECROW ESP32 E-Ink Display 4.2 Inch, CrowPanel E-Paper HMI Display Compatible with Arduino IDE, E Ink Screen with 400x300 Resolution Black/White Color, Driven by SPI Interface

Free Shipping

Editor's bottom line:

“This is the best one we tested. In terms of quality, brand and price, we couldn't ask for more.”

Main Highlights

Built-in ESP32-S3 Controller & SPI Interface - Comes with ESP32-S3-WROOM-1-N8R8 as the main MCU (up to 240 MHz) and standard 3-/4-wire SPI (default 4-wire) for easy integration. Supports the classic e-ink reader feel and responsive development flow
Ultra-Low Power & Power-Off Retention - This epaper display only consumes power during refresh. Static content stays visible without a continuous power supply ideal for battery-powered devices, smart labels and always-on displays
High-Resolution e-ink Display - This 4.2 e-paper display with 400x300 resolution delivers sharp black/white contrast and a wide viewing angle. Provides crisp clarity and a paper-like reading experience for smart tags and DIY devices
Reflective, Sunlight-Readable - The pure reflection mode means no backlight required; the content remains clearly readable even under strong sunlight. Hard-coated anti-glare surface ensures excellent visibility and durability
Rich Interfaces & Ready for Development - Includes BAT interface (2.2 V-3.7 V), UART0, 2x10 pin GPIO header, back/home/boot buttons, rotary switch, hard-coated anti-glare surface. Compatible with Arduino IDE, and suitable for DIY makers alike
Wide Application & Reliable Support - Whether youre building an e-paper reader/e-ink reader, smart home dashboard, electronic shelf tag or wearable display, this e-paper/eink display delivers. Any questions, get back to us

Show Price

Deals are Live

Special Amazon deal ends in: